From: no-reply@sashiko.virtuozzo.com
To: Alexander Ivanov <alexander.ivanov@virtuozzo.com>, den@openvz.org
Cc: devel@openvz.org
Subject: Re: [Devel] [PATCH hci-8.1 v4 01/11] dm-ploop: fix u32 overflow of the delta BAT byte size
Date: Mon, 12 Oct 2026 13:33:04 +0000 [thread overview]
Message-ID: <010701a130511aeb-b0d2102f-6395-4888-aa06-983b1b846fd1-000000@eu-central-1.amazonses.com> (raw)
In-Reply-To: <20261012132646.41494-2-alexander.ivanov@virtuozzo.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] dm-ploop: ploop_bat_clu_to_page_nr() still wraps size_t multiply before widening
--
commit 490ad8e2663849858d62f84d5062973178fffee9
Author: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
dm-ploop: fix u32 overflow of the delta BAT byte size
This patch computes the byte size of the header and BAT in u64 and uses
ploop_nr_bat_clusters() everywhere for the BAT cluster count. It also
rejects a header or a resize whose hb_nr exceeds PLOOP_MAX_HB_NR.
https://virtuozzo.atlassian.net/browse/VSTOR-148171
> diff --git a/drivers/md/dm-ploop.h b/drivers/md/dm-ploop.h
> --- a/drivers/md/dm-ploop.h
> +++ b/drivers/md/dm-ploop.h
[ ... ]
> @@ -410,9 +412,9 @@ static inline unsigned int ploop_nr_pages_in_cluster(struct ploop *ploop)
> static inline unsigned int ploop_nr_bat_clusters(struct ploop *ploop,
> u32 nr_bat_entries)
> {
> - unsigned long size, bat_clusters;
> + u64 size, bat_clusters;
>
> - size = (PLOOP_MAP_OFFSET + nr_bat_entries) * sizeof(map_index_t);
> + size = ((u64)nr_bat_entries + PLOOP_MAP_OFFSET) * sizeof(map_index_t);
> bat_clusters = DIV_ROUND_UP(size, CLU_SIZE(ploop));
>
> return bat_clusters;
[Severity: Medium]
Does the sibling helper ploop_bat_clu_to_page_nr() in dm-ploop.h still
wrap the same multiplication?
static inline u32 ploop_bat_clu_to_page_nr(u32 clu)
{
u64 byte;
byte = (clu + PLOOP_MAP_OFFSET) * sizeof(map_index_t);
return byte >> PAGE_SHIFT;
}
The multiplication is evaluated in size_t before the result is widened to
u64. Where size_t is 32 bits, this wraps for clu >= 2^30 - PLOOP_MAP_OFFSET.
That is the same range the commit message says is being fixed ("It wraps
for m_Size >= 2^30 - PLOOP_MAP_OFFSET"), and the message also says the size
is now computed in u64 "everywhere".
The new PLOOP_MAX_HB_NR limit only caps nr_bat_entries plus bat_clusters
near 2^32. A header or a resize with nr_bat_entries >= 2^30 - 16 therefore
still passes the new checks in ploop_setup_metadata() and ploop_resize().
Can a wrapped page number then reach these callers?
ploop_resize()->ploop_prealloc_md_pages()
new_nr_pages = ploop_bat_clu_to_page_nr(new_nr_bat_entries - 1) + 1;
This could allocate too few md pages.
init_be_iter()
u32 rem, last_page = ploop_bat_clu_to_page_nr(nr_be - 1);
This could give a wrong iteration end for the BAT entries.
ploop_map_bat_entry()
id = ploop_bat_clu_to_page_nr(clu);
md = ploop_md_page_find(ploop, id);
BUG_ON(!md);
A page id that wraps would then either miss the lookup and hit BUG_ON(!md),
or index past the pages that were allocated.
On 64-bit, size_t is 64 bits and clu + 16 cannot wrap in u32 because of the
PLOOP_MAX_HB_NR cap, so this looks specific to 32-bit builds. The DM_PLOOP
entry in drivers/md/Kconfig depends only on BLK_DEV_DM, so nothing prevents
such a build.
I have not confirmed whether other 32-bit limits make these sizes unusable
first. For example, 2^30 entries would need about 4 GiB of md pages, which
would probably fail to allocate.
Would it make sense to widen the multiplication in ploop_bat_clu_to_page_nr()
the same way, with ((u64)clu + PLOOP_MAP_OFFSET) * sizeof(map_index_t)?
--
Sashiko AI review · https://sashiko.vzint.dev/#/patchset/20261012132646.41494-1-alexander.ivanov@virtuozzo.com?part=1
_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel
next prev parent reply other threads:[~2026-10-12 13:34 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-12 13:26 [Devel] [PATCH hci-8.1 v4 00/11] dm-ploop: give back unused tail of top delta on suspend Alexander Ivanov
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 01/11] dm-ploop: fix u32 overflow of the delta BAT byte size Alexander Ivanov
2026-10-12 13:33 ` no-reply [this message]
2026-10-13 6:42 ` Alexander Ivanov
2026-10-13 7:00 ` Alexander Ivanov
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 02/11] dm-ploop: fix lost wakeup in ploop_allocator() Alexander Ivanov
2026-10-12 13:30 ` no-reply
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 03/11] dm-ploop: reject a delta header whose BAT does not cover the target Alexander Ivanov
2026-10-12 13:31 ` no-reply
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 04/11] dm-ploop: reject empty deltas Alexander Ivanov
2026-10-12 13:32 ` no-reply
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 05/11] dm-ploop: set delta is_raw before applying its mappings Alexander Ivanov
2026-10-12 13:34 ` no-reply
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 06/11] dm-ploop: factor out ploop_read_delta() from ploop_add_delta() Alexander Ivanov
2026-10-12 13:34 ` no-reply
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 07/11] dm-ploop: take bat_lock around md page lookup in ploop_llseek_hole() Alexander Ivanov
2026-10-12 13:36 ` no-reply
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 08/11] dm-ploop: use wake_up() for inflight_md_wq and dispatcher_wq_prealloc Alexander Ivanov
2026-10-12 13:35 ` no-reply
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 09/11] dm-ploop: fix use-after-free on the last inflight_md decrement Alexander Ivanov
2026-10-12 13:40 ` no-reply
2026-10-13 6:54 ` Alexander Ivanov
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 10/11] dm-ploop: reload metadata on resume Alexander Ivanov
2026-10-12 13:44 ` no-reply
2026-10-13 7:04 ` Alexander Ivanov
2026-10-12 13:26 ` [Devel] [PATCH hci-8.1 v4 11/11] dm-ploop: truncate unused tail of top delta on suspend Alexander Ivanov
2026-10-12 13:47 ` no-reply
2026-10-13 7:08 ` Alexander Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=010701a130511aeb-b0d2102f-6395-4888-aa06-983b1b846fd1-000000@eu-central-1.amazonses.com \
--to=no-reply@sashiko.virtuozzo.com \
--cc=alexander.ivanov@virtuozzo.com \
--cc=den@openvz.org \
--cc=devel@openvz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox