From: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
To: andrey.zhadchenko@virtuozzo.com
Cc: devel@openvz.org
Subject: [Devel] [PATCH hci-8.1 v10 09/10] dm-qcow2: retry R1/R2 writeback that failed with ENOSPC
Date: Mon, 9 Nov 2026 12:58:55 +0100 [thread overview]
Message-ID: <20261109115856.1362416-10-alexander.ivanov@virtuozzo.com> (raw)
In-Reply-To: <20261109115856.1362416-1-alexander.ivanov@virtuozzo.com>
A failed R1/R2 writeback sets MD_WRITEBACK_ERROR and drops MD_DIRTY.
Nothing writes the page again unless its refcounts change. On suspend
the md writeback flush finds the error and sets md_writeback_error, so
resume is refused until the image is checked and the target reloaded,
even if the failure was a transient ENOSPC of the underlying fs and
the space has been freed since.
Redirty the page on -ENOSPC, so the slow writeback timer retries it,
as data writes delayed on ENOSPC are retried. The suspend flush fires
the timer, which gives the page one more try. A page that still fails
then is not redirtied, as wants_suspend is set, so nothing is left
pending on a suspended device and md_writeback_error is set as before.
complete_metadata_writeback() turned every failed write into -EIO.
Pass the errno of the write through and keep -EIO for a short write.
A data request depending on a failed L1/L2 write then ends with
BLK_STS_NOSPC and is delayed and resubmitted like any other write
failing with ENOSPC, as already happens when fsync fails with it.
https://virtuozzo.atlassian.net/browse/VSTOR-148171
Feature: dm-qcow2: block device over QCOW2 files driver
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
---
drivers/md/dm-qcow2-map.c | 6 ++++--
drivers/md/dm-qcow2-target.c | 1 -
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/md/dm-qcow2-map.c b/drivers/md/dm-qcow2-map.c
index 4197f7704e18..27ae22495f37 100644
--- a/drivers/md/dm-qcow2-map.c
+++ b/drivers/md/dm-qcow2-map.c
@@ -1357,6 +1357,8 @@ static void clear_writeback_status(struct qcow2 *qcow2, struct md_page *md,
* so here we care about R1R2 only.
*/
md->status |= MD_WRITEBACK_ERROR;
+ if (ret == -ENOSPC && !READ_ONCE(qcow2->tgt->wants_suspend))
+ qcow2_md_make_dirty(qcow2, md, true);
}
if (md->wbd) {
if (likely(ret == 0))
@@ -3864,9 +3866,9 @@ static int complete_metadata_writeback(struct qcow2 *qcow2)
md = qio->ext->md;
qvec = qio->data;
ret = qio->ret;
- if (unlikely(ret != PAGE_SIZE))
+ if (unlikely(ret >= 0 && ret != PAGE_SIZE))
ret = -EIO;
- else
+ else if (ret == PAGE_SIZE)
ret = fsync_ret;
do_md_page_write_complete(ret, qcow2, md);
diff --git a/drivers/md/dm-qcow2-target.c b/drivers/md/dm-qcow2-target.c
index 6824d95193ae..1b7a75239291 100644
--- a/drivers/md/dm-qcow2-target.c
+++ b/drivers/md/dm-qcow2-target.c
@@ -190,7 +190,6 @@ void qcow2_flush_deferred_activity(struct qcow2_target *tgt, struct qcow2 *qcow2
for (node = rb_first(&qcow2->md_pages);
node; node = rb_next(node)) {
md = rb_entry(node, struct md_page, node);
- /* FIXME: call md_make_dirty() and try once again? */
if (md->status & MD_WRITEBACK_ERROR) {
QC_ERR(tgt->ti, "Failed to write dirty pages");
tgt->md_writeback_error = true;
--
2.53.0
_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel
next prev parent reply other threads:[~2026-11-09 12:00 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 11:58 [Devel] [PATCH hci-8.1 v10 00/10] dm-qcow2: truncate unused tail of image on suspend Alexander Ivanov
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 01/10] dm-qcow2: add qcow2_md_page_read_sync() helper Alexander Ivanov
2026-11-09 12:03 ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 02/10] dm-qcow2: drop duplicate prefix from QC_ERR/QC_INFO messages Alexander Ivanov
2026-11-09 12:02 ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 03/10] dm-qcow2: extend the file for a new refblock in allocate_cluster() Alexander Ivanov
2026-11-09 12:03 ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 04/10] dm-qcow2: complete wbd before ending the data qio Alexander Ivanov
2026-11-09 12:06 ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 05/10] dm-qcow2: flush lower md before clearing dirty bit on merge failure Alexander Ivanov
2026-11-09 12:05 ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 06/10] dm-qcow2: keep the dirty bit of an image that needs check Alexander Ivanov
2026-11-09 12:06 ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 07/10] dm-qcow2: flag the image for check if reftable relocation fails late Alexander Ivanov
2026-11-09 12:09 ` no-reply
2026-11-09 12:25 ` Alexander Ivanov
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 08/10] dm-qcow2: leak clusters allocated for a failed L1/L2 writeback Alexander Ivanov
2026-11-09 12:09 ` no-reply
2026-11-09 12:41 ` Alexander Ivanov
2026-11-09 11:58 ` Alexander Ivanov [this message]
2026-11-09 12:13 ` [Devel] [PATCH hci-8.1 v10 09/10] dm-qcow2: retry R1/R2 writeback that failed with ENOSPC no-reply
2026-11-09 12:45 ` Alexander Ivanov
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 10/10] dm-qcow2: truncate unused tail of image on suspend Alexander Ivanov
2026-11-09 12:14 ` no-reply
2026-11-09 13:26 ` Alexander Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261109115856.1362416-10-alexander.ivanov@virtuozzo.com \
--to=alexander.ivanov@virtuozzo.com \
--cc=andrey.zhadchenko@virtuozzo.com \
--cc=devel@openvz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox