Virtuozzo QEMU development (svt-core@virtuozzo.com)
 help / color / mirror / Atom feed
From: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
To: svt-core@virtuozzo.com
Cc: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Subject: [PATCH QEMU HCI-8.1 v4 16/31] migration: yank: Move register instance earlier
Date: Tue, 20 Oct 2026 19:30:56 +0300	[thread overview]
Message-ID: <20261020-vfio_v1-v4-16-83a5668230e5@virtuozzo.com> (raw)
In-Reply-To: <20261020-vfio_v1-v4-0-83a5668230e5@virtuozzo.com>

From: Fabiano Rosas <farosas@suse.de>

Move the register_instance call to migrate_prepare() so it can be
paired with the unregister_instance at migration_cleanup(). Otherwise,
the cleanup cannot be run when cpr_state_save() fails because the
instance is registered only after it.

When resuming from a paused postcopy migration, migrate_prepare()
returns early, but migration_cleanup() doesn't run, so the yank will
remain paired.

andrey.drobyshev:
    This commit was cherry-picked from the upstream commit 7e714392437c,
    adapted for the hci-dev base, which predates the upstream
    migration_connect_set_error() -> migration_connect_error_propagate()
    rename (77c82edadbe0): the error propagation calls in qmp_migrate()
    and qmp_migrate_finish() keep the older spelling.

    Also fixed here: upstream left the yank instance registered when
    qmp_migrate_finish() fails before connecting (nothing calls
    migration_cleanup() then), so the next migrate command aborted on
    yank_register_instance(&error_abort); and the unregister at the out:
    label ran on a resume, which never registered the instance.  Upstream
    fixed both in 6b587af5ec9d ("migration: Fold migration_cleanup() into
    migration_connect_error_propagate()"), which needs the above rework;
    this is the equivalent for our base.

    Also register the instance with errp, before migrate_init(), instead
    of with &error_abort: a duplicate instance, e.g. a previous migration
    still being cleaned up, then fails the migrate command instead of
    aborting QEMU.  And refuse migrate while an incoming postcopy
    migration is still in progress: the guest already runs then, but the
    incoming side still holds the yank instance.

Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/qemu-devel/20260123141656.6765-11-farosas@suse.de
Signed-off-by: Fabiano Rosas <farosas@suse.de>
---
 migration/migration.c | 43 +++++++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/migration/migration.c b/migration/migration.c
index 132f0d403b7..802dc900c6e 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -2182,6 +2182,15 @@ static bool migrate_prepare(MigrationState *s, bool resume, Error **errp)
         return false;
     }
 
+    /*
+     * The guest already runs during incoming postcopy, but the incoming
+     * migration still holds the yank instance registered below.
+     */
+    if (migration_in_incoming_postcopy()) {
+        error_setg(errp, "Incoming postcopy migration is still in progress");
+        return false;
+    }
+
     if (runstate_check(RUN_STATE_POSTMIGRATE)) {
         error_setg(errp, "Can't migrate the vm that was paused due to "
                    "previous migration");
@@ -2239,15 +2248,19 @@ static bool migrate_prepare(MigrationState *s, bool resume, Error **errp)
         }
     }
 
+    if (!yank_register_instance(MIGRATION_YANK_INSTANCE, errp)) {
+        return false;
+    }
+
     if (migrate_init(s, errp)) {
+        yank_unregister_instance(MIGRATION_YANK_INSTANCE);
         return false;
     }
 
     return true;
 }
 
-static void qmp_migrate_finish(MigrationAddress *addr, bool resume_requested,
-                               Error **errp);
+static void qmp_migrate_finish(MigrationAddress *addr, Error **errp);
 
 static void migrate_hup_add(MigrationState *s, QIOChannel *ioc, GSourceFunc cb,
                             void *opaque)
@@ -2272,7 +2285,7 @@ static gboolean qmp_migrate_finish_cb(QIOChannel *channel,
 {
     MigrationAddress *addr = opaque;
 
-    qmp_migrate_finish(addr, false, NULL);
+    qmp_migrate_finish(addr, NULL);
 
     cpr_state_close();
     migrate_hup_delete(migrate_get_current());
@@ -2284,7 +2297,6 @@ void qmp_migrate(const char *uri, bool has_channels,
                  MigrationChannelList *channels, bool has_detach, bool detach,
                  bool has_resume, bool resume, Error **errp)
 {
-    bool resume_requested;
     Error *local_err = NULL;
     MigrationState *s = migrate_get_current();
     g_autoptr(MigrationChannel) channel = NULL;
@@ -2337,8 +2349,7 @@ void qmp_migrate(const char *uri, bool has_channels,
         return;
     }
 
-    resume_requested = has_resume && resume;
-    if (!migrate_prepare(s, resume_requested, errp)) {
+    if (!migrate_prepare(s, has_resume && resume, errp)) {
         /* Error detected, put into errp */
         return;
     }
@@ -2362,27 +2373,26 @@ void qmp_migrate(const char *uri, bool has_channels,
                         QAPI_CLONE(MigrationAddress, addr));
 
     } else {
-        qmp_migrate_finish(addr, resume_requested, errp);
+        qmp_migrate_finish(addr, errp);
     }
 
 out:
     if (local_err) {
+        /* A resume didn't register it, see migrate_prepare() */
+        if (s->state != MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP) {
+            yank_unregister_instance(MIGRATION_YANK_INSTANCE);
+        }
         migration_connect_set_error(s, local_err);
         error_propagate(errp, local_err);
     }
 }
 
-static void qmp_migrate_finish(MigrationAddress *addr, bool resume_requested,
-                               Error **errp)
+static void qmp_migrate_finish(MigrationAddress *addr, Error **errp)
 {
     MigrationState *s = migrate_get_current();
     Error *local_err = NULL;
-
-    if (!resume_requested) {
-        if (!yank_register_instance(MIGRATION_YANK_INSTANCE, errp)) {
-            return;
-        }
-    }
+    /* Before the start functions below change the state */
+    bool resume = s->state == MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP;
 
     if (addr->transport == MIGRATION_ADDRESS_TYPE_SOCKET) {
         SocketAddress *saddr = &addr->u.socket;
@@ -2409,7 +2419,8 @@ static void qmp_migrate_finish(MigrationAddress *addr, bool resume_requested,
     }
 
     if (local_err) {
-        if (!resume_requested) {
+        /* Nothing connected: migration_cleanup() won't unregister it */
+        if (!resume) {
             yank_unregister_instance(MIGRATION_YANK_INSTANCE);
         }
         cpr_state_close();

-- 
2.47.1


  parent reply	other threads:[~2026-10-20 16:31 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-20 16:30 [PATCH QEMU HCI-8.1 v4 00/31] vfio: support qemu-update with passed through GPU's and vGPU's #VSTOR-103860 Andrey Drobyshev
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 01/31] VZ: migration/cpr-exec: fix Error leak in preserve_ram() Andrey Drobyshev
2026-10-20 16:34   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 02/31] migration/cpr-exec: restore RAM write access if exec fails Andrey Drobyshev
2026-10-20 16:34   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 03/31] vfio/region: create BAR dma-bufs with O_CLOEXEC Andrey Drobyshev
2026-10-20 16:35   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 04/31] migration/cpr-exec: require a file or exec migration URI Andrey Drobyshev
2026-10-20 16:37   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 05/31] migration: close the CPR state if the outgoing channel fails to open Andrey Drobyshev
2026-10-20 16:38   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 06/31] migration: Plug memory leaks after migrate_set_error() Andrey Drobyshev
2026-10-20 16:38   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 07/31] hw/vfio: Fix liveness check in vfio_connect_kvm_msi_virq() Andrey Drobyshev
2026-10-20 16:38   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 08/31] vfio/pci: Reject invalid MSI-X Table and PBA BIR values Andrey Drobyshev
2026-10-20 16:38   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 09/31] vfio/pci: Fix information leak in vfio_rom_read() Andrey Drobyshev
2026-10-20 16:39   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 10/31] vfio/pci: Initialize rom_read_failed in vfio_pci_load_rom() Andrey Drobyshev
2026-10-20 16:40   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 11/31] vfio/pci: Grow buffer in vfio_pci_host_match() Andrey Drobyshev
2026-10-20 16:39   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 12/31] q35: Fix migration of SMRAM state Andrey Drobyshev
2026-10-20 16:41   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 13/31] migration: ensure APIC is loaded prior to VFIO PCI devices Andrey Drobyshev
2026-10-20 16:40   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 14/31] migration: Fix regression of passing error_fatal into vmstate_load_state() Andrey Drobyshev
2026-10-20 16:43   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 15/31] migration: vmstate_save_state_v: fix double error_setg Andrey Drobyshev
2026-10-20 16:45   ` no-reply
2026-10-20 16:30 ` Andrey Drobyshev [this message]
2026-10-20 16:47   ` [PATCH QEMU HCI-8.1 v4 16/31] migration: yank: Move register instance earlier no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 17/31] migration: Free cpr-transfer MigrationAddress along with gsource Andrey Drobyshev
2026-10-20 16:47   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 18/31] migration: Move CPR HUP watch to cpr-transfer.c Andrey Drobyshev
2026-10-20 16:48   ` no-reply
2026-10-20 16:30 ` [PATCH QEMU HCI-8.1 v4 19/31] migration: Fix crash on second migration when cancel early Andrey Drobyshev
2026-10-20 16:52   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 20/31] kvm: tolerate ioctls after kvm_close() Andrey Drobyshev
2026-10-20 16:52   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 21/31] kvm: fix coalesced MMIO flush racing with kvm_close() Andrey Drobyshev
2026-10-20 16:54   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 22/31] migration/cpr: add cpr_is_in_progress() Andrey Drobyshev
2026-10-20 16:54   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 23/31] vfio/migration: don't migrate device state during CPR Andrey Drobyshev
2026-10-20 17:00   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 24/31] vfio/listener: skip dirty page tracking " Andrey Drobyshev
2026-10-20 16:59   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 25/31] VZ: vfio/cpr: don't close KVM on cpr-exec Andrey Drobyshev
2026-10-20 17:01   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 26/31] VZ: migration/cpr-exec: abort cpr-exec if memory can't be preserved Andrey Drobyshev
2026-10-20 17:02   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 27/31] VZ: migration/cpr-exec: take the vhost-net devices back if exec fails Andrey Drobyshev
2026-10-20 17:03   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 28/31] VZ: migration/cpr-exec: don't exec if a vhost-net device can't be released Andrey Drobyshev
2026-10-20 17:03   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 29/31] VZ: vfio/region: preserve BAR mappings across cpr-exec #VSTOR-103860 Andrey Drobyshev
2026-10-20 17:08   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 30/31] VZ: migration/cpr-exec: allow cpr-exec with VFIO devices #VSTOR-103860 Andrey Drobyshev
2026-10-20 17:04   ` no-reply
2026-10-20 16:31 ` [PATCH QEMU HCI-8.1 v4 31/31] VZ: vfio/container: lift the CPR blocker for mdev " Andrey Drobyshev
2026-10-20 17:06   ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261020-vfio_v1-v4-16-83a5668230e5@virtuozzo.com \
    --to=andrey.drobyshev@virtuozzo.com \
    --cc=svt-core@virtuozzo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox