[Devel] [PATCH hci-8.1 v3 0/3] dm-qcow2: truncate unused tail of image on suspend

[Devel] [PATCH hci-8.1 v3 0/3] dm-qcow2: truncate unused tail of image on suspend

[Alexander Ivanov]

On postsuspend dm-qcow2 truncates the image file only down to
file_preallocated_area_start, so clusters at the end of the file freed
by discard are never given back and the file never shrinks.

This series makes postsuspend scan the refcount blocks backward and
truncate the file to the end of the last used cluster.

Patch 1 adds qcow2_md_page_read_sync() helper, which is needed by the
scan. Patch 2 is a small cleanup of duplicate prefixes in QC_ERR/QC_INFO
messages. Patch 3 does the actual truncation.

https://virtuozzo.atlassian.net/browse/VSTOR-148171

v3:
- Split from the common series with dm-ploop: dm-ploop patches are
  sent as a separate series.
- Patch 1: rename qcow2_get_md_page_sync() to qcow2_md_page_read_sync(),
  reword commit message and comment.
- Patch 2: new patch.
- Patch 3: start the scan from file_preallocated_area_start instead of
  the end of the file and clamp the result to it, as the last cluster
  may be partial; print the scan error with %pe and drop the duplicate
  "dm-qcow2:" prefix from it.

v2:
- Add dm-ploop support (patches 3-6), as requested in v1 review.
- dm-qcow2: move get_md_page_sync() to a separate patch as
  qcow2_md_page_read_sync() and use it in qcow2_parse_header() as well.
- dm-qcow2: start the refcount scan below file_preallocated_area_start
  instead of the end of the file, and truncate to the used end directly
  instead of min(file_preallocated_area_start, used end).

Alexander Ivanov (3):
  dm-qcow2: add qcow2_md_page_read_sync() helper
  dm-qcow2: drop duplicate prefix from QC_ERR/QC_INFO messages
  dm-qcow2: truncate unused tail of image on suspend

 drivers/md/dm-qcow2-map.c    | 56 ++++++++++++++++++++++++++
 drivers/md/dm-qcow2-target.c | 78 ++++++++++++++++++++++++++----------
 drivers/md/dm-qcow2.h        |  3 ++
 3 files changed, 116 insertions(+), 21 deletions(-)

-- 
2.53.0

_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

[Devel] [PATCH hci-8.1 v3 1/3] dm-qcow2: add qcow2_md_page_read_sync() helper

[Alexander Ivanov]

Add a helper, which returns an up to date md page from md cache,
or allocates a new one, inserts it and reads it synchronously.
On read failure the page is erased from cache and freed.

Use it in qcow2_parse_header() instead of open-coded allocation
and read of page 0. It will also be used by the next patch.

https://virtuozzo.atlassian.net/browse/VSTOR-148171
Feature: dm-qcow2: block device over QCOW2 files driver

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
---
 drivers/md/dm-qcow2-target.c | 36 +++++++++++++++++++++++++++++++-----
 drivers/md/dm-qcow2.h        |  2 ++
 2 files changed, 33 insertions(+), 5 deletions(-)

diff --git a/drivers/md/dm-qcow2-target.c b/drivers/md/dm-qcow2-target.c
index be09615eb8e2..3e47e66b4007 100644
--- a/drivers/md/dm-qcow2-target.c
+++ b/drivers/md/dm-qcow2-target.c
@@ -418,6 +418,36 @@ int qcow2_alloc_and_insert_md_page(struct qcow2 *qcow2, u64 index, struct md_pag
 }
 ALLOW_ERROR_INJECTION(qcow2_alloc_and_insert_md_page, ERRNO);
 
+/*
+ * Returns up to date md page from cache, or allocates
+ * a new one and reads it synchronously.
+ */
+int qcow2_md_page_read_sync(struct qcow2 *qcow2, u64 id, struct md_page **md)
+{
+	int ret;
+
+	spin_lock_irq(&qcow2->md_pages_lock);
+	*md = qcow2_md_page_find_or_postpone(qcow2, id, NULL);
+	spin_unlock_irq(&qcow2->md_pages_lock);
+	if (*md)
+		return 0;
+
+	ret = qcow2_alloc_and_insert_md_page(qcow2, id, md);
+	if (ret)
+		return ret;
+
+	ret = qcow2_rw_page_sync(READ, qcow2, id, (*md)->page);
+	spin_lock_irq(&qcow2->md_pages_lock);
+	if (ret)
+		qcow2_md_page_erase(qcow2, *md);
+	else
+		(*md)->status |= MD_UPTODATE;
+	spin_unlock_irq(&qcow2->md_pages_lock);
+	if (ret)
+		qcow2_free_md_page(*md);
+	return ret;
+}
+
 static void inflight_ref_exit0(struct percpu_ref *ref)
 {
 	struct qcow2_target *tgt = container_of(ref, struct qcow2_target,
@@ -851,13 +881,9 @@ static int qcow2_parse_header(struct dm_target *ti, struct qcow2 *qcow2,
 	}
 	qcow2->file_preallocated_area_start = qcow2->file_size;
 
-	ret = qcow2_alloc_and_insert_md_page(qcow2, 0, &md);
-	if (ret)
-		return ret;
-	ret = qcow2_rw_page_sync(READ, qcow2, md->id, md->page);
+	ret = qcow2_md_page_read_sync(qcow2, 0, &md);
 	if (ret)
 		return ret;
-	md->status |= MD_UPTODATE;
 
 	raw_hdr = kmap(md->page);
 	min_len = to_bytes(ti->len);
diff --git a/drivers/md/dm-qcow2.h b/drivers/md/dm-qcow2.h
index d9b8c38e093f..69d3ae6fca8a 100644
--- a/drivers/md/dm-qcow2.h
+++ b/drivers/md/dm-qcow2.h
@@ -386,6 +386,8 @@ void do_qcow2_work(struct work_struct *ws);
 void do_qcow2_fsync_work(struct work_struct *ws);
 int qcow2_alloc_and_insert_md_page(struct qcow2 *qcow2, u64 index,
 					struct md_page **md);
+int qcow2_md_page_read_sync(struct qcow2 *qcow2, u64 id,
+			    struct md_page **md);
 struct md_page *qcow2_md_page_find_or_postpone(struct qcow2 *qcow2,
 					       u64 id, struct qio **qio);
 struct md_page *qcow2_md_page_renumber(struct qcow2 *qcow2, u64 id,
-- 
2.53.0

_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

[Devel] [PATCH hci-8.1 v3 2/3] dm-qcow2: drop duplicate prefix from QC_ERR/QC_INFO messages

[Alexander Ivanov]

QCOW2_FMT already adds the "dm-qcow2: <dev>: " prefix and the trailing
newline, so several messages were printed like:

    dm-qcow2: <dev>: dm-qcow2: Can't parse metadata

and some of them were followed by an empty line. Drop the redundant
prefix and newlines.

https://virtuozzo.atlassian.net/browse/VSTOR-148171
Feature: dm-qcow2: block device over QCOW2 files driver

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
---
 drivers/md/dm-qcow2-target.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/md/dm-qcow2-target.c b/drivers/md/dm-qcow2-target.c
index 3e47e66b4007..b3d5d5e8c7c2 100644
--- a/drivers/md/dm-qcow2-target.c
+++ b/drivers/md/dm-qcow2-target.c
@@ -192,7 +192,7 @@ void qcow2_flush_deferred_activity(struct qcow2_target *tgt, struct qcow2 *qcow2
 		md = rb_entry(node, struct md_page, node);
 		/* FIXME: call md_make_dirty() and try once again? */
 		if (md->status & MD_WRITEBACK_ERROR) {
-			QC_ERR(tgt->ti, "qcow2: Failed to write dirty pages");
+			QC_ERR(tgt->ti, "Failed to write dirty pages");
 			tgt->md_writeback_error = true;
 			break;
 		}
@@ -829,19 +829,19 @@ static int qcow2_parse_extensions(struct dm_target *ti, struct qcow2 *qcow2,
 			struct Qcow2BitmapHeaderExt bitmaps_ext;
 
 			if (ext.len != sizeof(bitmaps_ext)) {
-				QC_ERR(ti, "unexpected bitmap extension size\n");
+				QC_ERR(ti, "unexpected bitmap extension size");
 				return -EINVAL;
 			}
 
 			if (offset + sizeof(bitmaps_ext) > end) {
-				QC_ERR(ti, "unexpected end of extension area\n");
+				QC_ERR(ti, "unexpected end of extension area");
 				return -EINVAL;
 			}
 
 			memcpy(&bitmaps_ext, addr + offset, sizeof(bitmaps_ext));
 			ret = qcow2_parse_bitmap_ext(ti, qcow2, &bitmaps_ext);
 			if (ret) {
-				QC_ERR(ti, "unable to pase bitmap extension\n");
+				QC_ERR(ti, "unable to pase bitmap extension");
 				return ret;
 			}
 			break;
@@ -874,7 +874,7 @@ static int qcow2_parse_header(struct dm_target *ti, struct qcow2 *qcow2,
 		new_size = PAGE_ALIGN(qcow2->file_size);
 		ret = qcow2_truncate_safe(file, new_size);
 		if (ret) {
-			QC_ERR(ti, "qcow2: Can't truncate file");
+			QC_ERR(ti, "Can't truncate file");
 			return ret;
 		} /* See md_page_read_complete() */
 		qcow2->file_size = new_size;
@@ -905,14 +905,14 @@ static int qcow2_parse_header(struct dm_target *ti, struct qcow2 *qcow2,
 	ret = -EXDEV;
 	if (upper) {
 		if (upper->clu_size != qcow2->clu_size) {
-			QC_ERR(ti, "dm-qcow2: clu_size mismatch\n");
+			QC_ERR(ti, "clu_size mismatch");
 			goto out;
 		}
 		if (upper->ext_l2 != qcow2->ext_l2) {
 			if (is_bottom && upper->ext_l2 && !qcow2->ext_l2) {
-				QC_INFO(ti, "dm-qcow2: using bottom delta without ext_l2\n");
+				QC_INFO(ti, "using bottom delta without ext_l2");
 			} else {
-				QC_ERR(ti, "dm-qcow2: upper delta without ext_l2 is unsupported\n");
+				QC_ERR(ti, "upper delta without ext_l2 is unsupported");
 				goto out; /* This is not supported yet */
 			}
 		}
@@ -934,11 +934,11 @@ static int qcow2_parse_header(struct dm_target *ti, struct qcow2 *qcow2,
 		ext_end = PAGE_SIZE;
 
 	if (ext_end > PAGE_SIZE) {
-		QC_INFO(ti, "extensions are too long, skipping them\n");
+		QC_INFO(ti, "extensions are too long, skipping them");
 	} else {
 		ret = qcow2_parse_extensions(ti, qcow2, ext_start, ext_end, raw_hdr);
 		if (ret) {
-			QC_ERR(ti, "failed to parse extensions\n");
+			QC_ERR(ti, "failed to parse extensions");
 			goto out;
 		}
 	}
@@ -971,7 +971,7 @@ static int qcow2_parse_metadata(struct dm_target *ti, struct qcow2_target *tgt)
 	ret = 0;
 out:
 	if (ret)
-		QC_ERR(ti, "dm-qcow2: Can't parse metadata");
+		QC_ERR(ti, "Can't parse metadata");
 	return ret;
 }
 
@@ -1052,7 +1052,7 @@ static void qcow2_truncate_preallocations(struct dm_target *ti)
 
 	ret = qcow2_truncate_safe(qcow2->file, end);
 	if (ret) {
-		QC_ERR(ti, "dm-qcow2: Can't truncate preallocations");
+		QC_ERR(ti, "Can't truncate preallocations");
 		tgt->truncate_error = true;
 		return;
 	}
@@ -1138,7 +1138,7 @@ static void qcow2_postsuspend(struct dm_target *ti)
 	if (dm_table_get_mode(ti->table) & FMODE_WRITE) {
 		ret = qcow2_set_image_file_features(qcow2, false);
 		if (ret)
-			QC_ERR(ti, "qcow2: Can't set features");
+			QC_ERR(ti, "Can't set features");
 	}
 }
 static int qcow2_preresume(struct dm_target *ti)
@@ -1147,7 +1147,7 @@ static int qcow2_preresume(struct dm_target *ti)
 	int ret = 0;
 
 	if (qcow2_wants_check(tgt)) {
-		QC_ERR(ti, "qcow2: image check and target reload are required");
+		QC_ERR(ti, "image check and target reload are required");
 		return -EIO;
 	}
 
@@ -1168,7 +1168,7 @@ static int qcow2_preresume(struct dm_target *ti)
 	if (dm_table_get_mode(ti->table) & FMODE_WRITE) {
 		ret = qcow2_set_image_file_features(tgt->top, true);
 		if (ret)
-			QC_ERR(ti, "qcow2: Can't set features");
+			QC_ERR(ti, "Can't set features");
 	}
 	if (!ret)
 		qcow2_set_wants_suspend(ti, false);
-- 
2.53.0

_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

[Devel] [PATCH hci-8.1 v3 3/3] dm-qcow2: truncate unused tail of image on suspend

[Alexander Ivanov]

On postsuspend we truncate the image file only down to
file_preallocated_area_start, i.e. we drop preallocations only.
Clusters at the end of the file freed by discard (refcount dropped
to zero) are never given back, so the file size never shrinks.

Add qcow2_calc_used_end(), which scans refcount blocks backward from
file_preallocated_area_start and returns the end of the last cluster
with non-zero refcount. Refcount ranges with no allocated refblock
are skipped at once. Metadata pages are taken from md cache or read
synchronously. This is called on suspended device after md writeback,
so R1 and R2 can't change under us.

Truncate the file to the used end. Skip the scan if md writeback
failed, as refcounts on disk are stale then, and fall back to the old
behaviour on scan error.

https://virtuozzo.atlassian.net/browse/VSTOR-148171
Feature: dm-qcow2: block device over QCOW2 files driver

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
---
 drivers/md/dm-qcow2-map.c    | 56 ++++++++++++++++++++++++++++++++++++
 drivers/md/dm-qcow2-target.c | 12 +++++++-
 drivers/md/dm-qcow2.h        |  1 +
 3 files changed, 68 insertions(+), 1 deletion(-)

diff --git a/drivers/md/dm-qcow2-map.c b/drivers/md/dm-qcow2-map.c
index 78ee7cf5e881..65ee6ae144bf 100644
--- a/drivers/md/dm-qcow2-map.c
+++ b/drivers/md/dm-qcow2-map.c
@@ -2208,6 +2208,62 @@ int qcow2_truncate_safe(struct file *file, loff_t new_len)
 	return do_ftruncate(file, new_len, 0);
 }
 
+/*
+ * Returns the end of the last cluster, which is used according
+ * to refcount table, clamped to file_preallocated_area_start since
+ * the last cluster may be partial. Clusters freed by discard may
+ * leave the tail of file unused. Everything at or above
+ * file_preallocated_area_start is unused by construction, so the scan
+ * starts below it. This must be called on suspended device after md
+ * writeback, so nobody changes R1 and R2.
+ */
+loff_t qcow2_calc_used_end(struct qcow2 *qcow2)
+{
+	u32 clu_size = qcow2->clu_size;
+	struct qcow2_map_item r1, r2;
+	struct md_page *r1_md = NULL;
+	loff_t pos;
+	s32 i;
+	int ret;
+
+	pos = round_down(qcow2->file_preallocated_area_start - 1, clu_size);
+	while (pos >= 0) {
+		if (calc_refcounters_map(qcow2, pos, &r1, &r2) < 0)
+			return -EIO;
+
+		if (!r1_md || r1_md->id != r1.page_id) {
+			ret = qcow2_md_page_read_sync(qcow2, r1.page_id, &r1_md);
+			if (ret)
+				return ret;
+		}
+		r1.md = r1_md;
+
+		ret = calc_r2_page_id(qcow2, &r1, &r2);
+		if (ret == -ENOENT) {
+			/* No R2 cluster, so all clusters it covers are unused */
+			pos = (loff_t)r1.index * qcow2->refblock_entries * clu_size;
+			pos -= clu_size;
+			continue;
+		}
+
+		if (ret < 0)
+			return ret;
+
+		ret = qcow2_md_page_read_sync(qcow2, r2.page_id, &r2.md);
+		if (ret)
+			return ret;
+
+		for (i = r2.index_in_page; i >= 0; i--, pos -= clu_size) {
+			/* Last cluster is partial if size isn't cluster-aligned */
+			if (get_r2_entry(qcow2, r2.md, i))
+				return min_t(loff_t, pos + clu_size,
+					     qcow2->file_preallocated_area_start);
+		}
+	}
+
+	return -EIO;
+}
+
 static int truncate_prealloc_safe(struct qcow2 *qcow2, loff_t len, const char *func)
 {
 	loff_t prealloc_len, max_prealloc_len = qcow2->reftable_max_file_size;
diff --git a/drivers/md/dm-qcow2-target.c b/drivers/md/dm-qcow2-target.c
index b3d5d5e8c7c2..5a72d0f2e9ef 100644
--- a/drivers/md/dm-qcow2-target.c
+++ b/drivers/md/dm-qcow2-target.c
@@ -1042,11 +1042,21 @@ static void qcow2_truncate_preallocations(struct dm_target *ti)
 {
 	struct qcow2_target *tgt = to_qcow2_target(ti);
 	struct qcow2 *qcow2 = top_qcow2_protected(ti);
-	loff_t end = qcow2->file_preallocated_area_start;
+	loff_t used_end, end = qcow2->file_preallocated_area_start;
 	int ret;
 
 	if (!(dm_table_get_mode(ti->table) & FMODE_WRITE))
 		return;
+
+	/* Refcounts on disk are stale after failed md writeback */
+	if (!tgt->md_writeback_error) {
+		used_end = qcow2_calc_used_end(qcow2);
+		if (used_end < 0)
+			QC_ERR(ti, "Can't find used end: %pe", ERR_PTR(used_end));
+		else
+			end = used_end;
+	}
+
 	if (end == qcow2->file_size)
 		return;
 
diff --git a/drivers/md/dm-qcow2.h b/drivers/md/dm-qcow2.h
index 69d3ae6fca8a..73d3cf175bbf 100644
--- a/drivers/md/dm-qcow2.h
+++ b/drivers/md/dm-qcow2.h
@@ -411,6 +411,7 @@ void qcow2_ref_dec(struct qcow2_target *tgt, u8 ref_index);
 int qcow2_inflight_ref_switch(struct qcow2_target *tgt);
 void qcow2_flush_deferred_activity(struct qcow2_target *tgt, struct qcow2 *qcow2);
 int qcow2_truncate_safe(struct file *file, loff_t new_len);
+loff_t qcow2_calc_used_end(struct qcow2 *qcow2);
 
 void qcow2_merge_backward_work(struct work_struct *work);
 void qcow2_merge_backward_cancel(struct qcow2_target *tgt);
-- 
2.53.0

_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

Re: [Devel] [PATCH hci-8.1 v3 2/3] dm-qcow2: drop duplicate prefix from QC_ERR/QC_INFO messages

[no-reply]

> QCOW2_FMT already adds the "dm-qcow2: <dev>: " prefix and the trailing
> newline, so several messages were printed like:
> 
>     dm-qcow2: <dev>: dm-qcow2: Can't parse metadata
> 
> and some of them were followed by an empty line. Drop the redundant
> prefix and newlines.
> 
> https://virtuozzo.atlassian.net/browse/VSTOR-148171
> Feature: dm-qcow2: block device over QCOW2 files driver
> 
> Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.vzint.dev/#/patchset/20261008100449.550882-1-alexander.ivanov@virtuozzo.com?part=2


_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

Re: [Devel] [PATCH hci-8.1 v3 1/3] dm-qcow2: add qcow2_md_page_read_sync() helper

[no-reply]

> Add a helper, which returns an up to date md page from md cache,
> or allocates a new one, inserts it and reads it synchronously.
> On read failure the page is erased from cache and freed.
> 
> Use it in qcow2_parse_header() instead of open-coded allocation
> and read of page 0. It will also be used by the next patch.
> 
> https://virtuozzo.atlassian.net/browse/VSTOR-148171
> Feature: dm-qcow2: block device over QCOW2 files driver
> 
> Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.vzint.dev/#/patchset/20261008100449.550882-1-alexander.ivanov@virtuozzo.com?part=1


_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

Re: [Devel] [PATCH hci-8.1 v3 3/3] dm-qcow2: truncate unused tail of image on suspend

[no-reply]

> On postsuspend we truncate the image file only down to
> file_preallocated_area_start, i.e. we drop preallocations only.
> Clusters at the end of the file freed by discard (refcount dropped
> to zero) are never given back, so the file size never shrinks.
> 
> Add qcow2_calc_used_end(), which scans refcount blocks backward from
> file_preallocated_area_start and returns the end of the last cluster
> with non-zero refcount. Refcount ranges with no allocated refblock
> are skipped at once. Metadata pages are taken from md cache or read
> synchronously. This is called on suspended device after md writeback,
> so R1 and R2 can't change under us.
> 
> Truncate the file to the used end. Skip the scan if md writeback
> failed, as refcounts on disk are stale then, and fall back to the old
> behaviour on scan error.
> 
> https://virtuozzo.atlassian.net/browse/VSTOR-148171
> Feature: dm-qcow2: block device over QCOW2 files driver
> 
> Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.vzint.dev/#/patchset/20261008100449.550882-1-alexander.ivanov@virtuozzo.com?part=3


_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

Re: [Devel] [PATCH hci-8.1 v3 1/3] dm-qcow2: add qcow2_md_page_read_sync() helper

[Denis V. Lunev]

On 10/8/26 12:04, Alexander Ivanov wrote:
> Add a helper, which returns an up to date md page from md cache,
> or allocates a new one, inserts it and reads it synchronously.
> On read failure the page is erased from cache and freed.
>
> Use it in qcow2_parse_header() instead of open-coded allocation
> and read of page 0. It will also be used by the next patch.
>
> https://virtuozzo.atlassian.net/browse/VSTOR-148171
> Feature: dm-qcow2: block device over QCOW2 files driver
>
> Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
> ---
>  drivers/md/dm-qcow2-target.c | 36 +++++++++++++++++++++++++++++++-----
>  drivers/md/dm-qcow2.h        |  2 ++
>  2 files changed, 33 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/md/dm-qcow2-target.c b/drivers/md/dm-qcow2-target.c
> index be09615eb8e2..3e47e66b4007 100644
> --- a/drivers/md/dm-qcow2-target.c
> +++ b/drivers/md/dm-qcow2-target.c
> @@ -418,6 +418,36 @@ int qcow2_alloc_and_insert_md_page(struct qcow2 *qcow2, u64 index, struct md_pag
>  }
>  ALLOW_ERROR_INJECTION(qcow2_alloc_and_insert_md_page, ERRNO);
>  
> +/*
> + * Returns up to date md page from cache, or allocates
> + * a new one and reads it synchronously.
> + */
> +int qcow2_md_page_read_sync(struct qcow2 *qcow2, u64 id, struct md_page **md)
> +{
> +	int ret;
> +
> +	spin_lock_irq(&qcow2->md_pages_lock);
> +	*md = qcow2_md_page_find_or_postpone(qcow2, id, NULL);
> +	spin_unlock_irq(&qcow2->md_pages_lock);
> +	if (*md)
> +		return 0;
> +
> +	ret = qcow2_alloc_and_insert_md_page(qcow2, id, md);
> +	if (ret)
> +		return ret;
> +
> +	ret = qcow2_rw_page_sync(READ, qcow2, id, (*md)->page);
> +	spin_lock_irq(&qcow2->md_pages_lock);
> +	if (ret)
> +		qcow2_md_page_erase(qcow2, *md);
> +	else
> +		(*md)->status |= MD_UPTODATE;
> +	spin_unlock_irq(&qcow2->md_pages_lock);
> +	if (ret)
> +		qcow2_free_md_page(*md);
> +	return ret;
> +}
> +

The comment on qcow2_md_page_read_sync() says it returns
an up-to-date page, but that depends on no read being in flight.
If a page is cached but not MD_UPTODATE,
qcow2_md_page_find_or_postpone() returns NULL and the insert
that follows fails.

This can't happen on a suspended device, but
the comment should state the assumption.
_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

Re: [Devel] [PATCH hci-8.1 v3 3/3] dm-qcow2: truncate unused tail of image on suspend

[Denis V. Lunev]

On 10/8/26 12:04, Alexander Ivanov wrote:
> On postsuspend we truncate the image file only down to
> file_preallocated_area_start, i.e. we drop preallocations only.
> Clusters at the end of the file freed by discard (refcount dropped
> to zero) are never given back, so the file size never shrinks.
>
> Add qcow2_calc_used_end(), which scans refcount blocks backward from
> file_preallocated_area_start and returns the end of the last cluster
> with non-zero refcount. Refcount ranges with no allocated refblock
> are skipped at once. Metadata pages are taken from md cache or read
> synchronously. This is called on suspended device after md writeback,
> so R1 and R2 can't change under us.
>
> Truncate the file to the used end. Skip the scan if md writeback
> failed, as refcounts on disk are stale then, and fall back to the old
> behaviour on scan error.
>
> https://virtuozzo.atlassian.net/browse/VSTOR-148171
> Feature: dm-qcow2: block device over QCOW2 files driver
>
> Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
> ---
>  drivers/md/dm-qcow2-map.c    | 56 ++++++++++++++++++++++++++++++++++++
>  drivers/md/dm-qcow2-target.c | 12 +++++++-
>  drivers/md/dm-qcow2.h        |  1 +
>  3 files changed, 68 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/md/dm-qcow2-map.c b/drivers/md/dm-qcow2-map.c
> index 78ee7cf5e881..65ee6ae144bf 100644
> --- a/drivers/md/dm-qcow2-map.c
> +++ b/drivers/md/dm-qcow2-map.c
> @@ -2208,6 +2208,62 @@ int qcow2_truncate_safe(struct file *file, loff_t new_len)
>  	return do_ftruncate(file, new_len, 0);
>  }
>  
> +/*
> + * Returns the end of the last cluster, which is used according
> + * to refcount table, clamped to file_preallocated_area_start since
> + * the last cluster may be partial. Clusters freed by discard may
> + * leave the tail of file unused. Everything at or above
> + * file_preallocated_area_start is unused by construction, so the scan
> + * starts below it. This must be called on suspended device after md
> + * writeback, so nobody changes R1 and R2.
> + */
> +loff_t qcow2_calc_used_end(struct qcow2 *qcow2)
> +{
> +	u32 clu_size = qcow2->clu_size;
> +	struct qcow2_map_item r1, r2;
> +	struct md_page *r1_md = NULL;
> +	loff_t pos;
> +	s32 i;
> +	int ret;
> +
> +	pos = round_down(qcow2->file_preallocated_area_start - 1, clu_size);
> +	while (pos >= 0) {
> +		if (calc_refcounters_map(qcow2, pos, &r1, &r2) < 0)
> +			return -EIO;
> +
> +		if (!r1_md || r1_md->id != r1.page_id) {
> +			ret = qcow2_md_page_read_sync(qcow2, r1.page_id, &r1_md);
> +			if (ret)
> +				return ret;
> +		}
> +		r1.md = r1_md;
> +
> +		ret = calc_r2_page_id(qcow2, &r1, &r2);
> +		if (ret == -ENOENT) {
> +			/* No R2 cluster, so all clusters it covers are unused */
> +			pos = (loff_t)r1.index * qcow2->refblock_entries * clu_size;
> +			pos -= clu_size;
> +			continue;
> +		}
> +
> +		if (ret < 0)
> +			return ret;
> +
> +		ret = qcow2_md_page_read_sync(qcow2, r2.page_id, &r2.md);
> +		if (ret)
> +			return ret;
> +
> +		for (i = r2.index_in_page; i >= 0; i--, pos -= clu_size) {
> +			/* Last cluster is partial if size isn't cluster-aligned */
> +			if (get_r2_entry(qcow2, r2.md, i))
> +				return min_t(loff_t, pos + clu_size,
> +					     qcow2->file_preallocated_area_start);
> +		}
> +	}
> +
> +	return -EIO;
> +}
> +
>  static int truncate_prealloc_safe(struct qcow2 *qcow2, loff_t len, const char *func)
>  {
>  	loff_t prealloc_len, max_prealloc_len = qcow2->reftable_max_file_size;
> diff --git a/drivers/md/dm-qcow2-target.c b/drivers/md/dm-qcow2-target.c
> index b3d5d5e8c7c2..5a72d0f2e9ef 100644
> --- a/drivers/md/dm-qcow2-target.c
> +++ b/drivers/md/dm-qcow2-target.c
> @@ -1042,11 +1042,21 @@ static void qcow2_truncate_preallocations(struct dm_target *ti)
>  {
>  	struct qcow2_target *tgt = to_qcow2_target(ti);
>  	struct qcow2 *qcow2 = top_qcow2_protected(ti);
> -	loff_t end = qcow2->file_preallocated_area_start;
> +	loff_t used_end, end = qcow2->file_preallocated_area_start;
>  	int ret;
>  
>  	if (!(dm_table_get_mode(ti->table) & FMODE_WRITE))
>  		return;
> +
> +	/* Refcounts on disk are stale after failed md writeback */
> +	if (!tgt->md_writeback_error) {
> +		used_end = qcow2_calc_used_end(qcow2);
> +		if (used_end < 0)
> +			QC_ERR(ti, "Can't find used end: %pe", ERR_PTR(used_end));
> +		else
> +			end = used_end;
> +	}
> +
>  	if (end == qcow2->file_size)
>  		return;
>  
> diff --git a/drivers/md/dm-qcow2.h b/drivers/md/dm-qcow2.h
> index 69d3ae6fca8a..73d3cf175bbf 100644
> --- a/drivers/md/dm-qcow2.h
> +++ b/drivers/md/dm-qcow2.h
> @@ -411,6 +411,7 @@ void qcow2_ref_dec(struct qcow2_target *tgt, u8 ref_index);
>  int qcow2_inflight_ref_switch(struct qcow2_target *tgt);
>  void qcow2_flush_deferred_activity(struct qcow2_target *tgt, struct qcow2 *qcow2);
>  int qcow2_truncate_safe(struct file *file, loff_t new_len);
> +loff_t qcow2_calc_used_end(struct qcow2 *qcow2);
>  
>  void qcow2_merge_backward_work(struct work_struct *work);
>  void qcow2_merge_backward_cancel(struct qcow2_target *tgt);
Please say in the cover letter or the commit message that
close and the RO reload also go through postsuspend, so
readers don't have to work it out.

_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

Re: [Devel] [PATCH hci-8.1 v3 0/3] dm-qcow2: truncate unused tail of image on suspend

[Denis V. Lunev]

On 10/8/26 12:04, Alexander Ivanov wrote:
> On postsuspend dm-qcow2 truncates the image file only down to
> file_preallocated_area_start, so clusters at the end of the file freed
> by discard are never given back and the file never shrinks.
>
> This series makes postsuspend scan the refcount blocks backward and
> truncate the file to the end of the last used cluster.
>
> Patch 1 adds qcow2_md_page_read_sync() helper, which is needed by the
> scan. Patch 2 is a small cleanup of duplicate prefixes in QC_ERR/QC_INFO
> messages. Patch 3 does the actual truncation.
>
> https://virtuozzo.atlassian.net/browse/VSTOR-148171
>
> v3:
> - Split from the common series with dm-ploop: dm-ploop patches are
>   sent as a separate series.
> - Patch 1: rename qcow2_get_md_page_sync() to qcow2_md_page_read_sync(),
>   reword commit message and comment.
> - Patch 2: new patch.
> - Patch 3: start the scan from file_preallocated_area_start instead of
>   the end of the file and clamp the result to it, as the last cluster
>   may be partial; print the scan error with %pe and drop the duplicate
>   "dm-qcow2:" prefix from it.
>
> v2:
> - Add dm-ploop support (patches 3-6), as requested in v1 review.
> - dm-qcow2: move get_md_page_sync() to a separate patch as
>   qcow2_md_page_read_sync() and use it in qcow2_parse_header() as well.
> - dm-qcow2: start the refcount scan below file_preallocated_area_start
>   instead of the end of the file, and truncate to the used end directly
>   instead of min(file_preallocated_area_start, used end).
>
> Alexander Ivanov (3):
>   dm-qcow2: add qcow2_md_page_read_sync() helper
>   dm-qcow2: drop duplicate prefix from QC_ERR/QC_INFO messages
>   dm-qcow2: truncate unused tail of image on suspend
>
>  drivers/md/dm-qcow2-map.c    | 56 ++++++++++++++++++++++++++
>  drivers/md/dm-qcow2-target.c | 78 ++++++++++++++++++++++++++----------
>  drivers/md/dm-qcow2.h        |  3 ++
>  3 files changed, 116 insertions(+), 21 deletions(-)
>
with 2 nits in comments

Reviewed-by: Denis V. Lunev <den@openvz.org>
_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel