All Virtuozzo development lists (kernel + QEMU)
 help / color / mirror / Atom feed
From: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
To: andrey.zhadchenko@virtuozzo.com
Cc: devel@openvz.org
Subject: [Devel] [PATCH hci-8.1 v10 09/10] dm-qcow2: retry R1/R2 writeback that failed with ENOSPC
Date: Mon,  9 Nov 2026 12:58:55 +0100	[thread overview]
Message-ID: <20261109115856.1362416-10-alexander.ivanov@virtuozzo.com> (raw)
In-Reply-To: <20261109115856.1362416-1-alexander.ivanov@virtuozzo.com>

A failed R1/R2 writeback sets MD_WRITEBACK_ERROR and drops MD_DIRTY.
Nothing writes the page again unless its refcounts change. On suspend
the md writeback flush finds the error and sets md_writeback_error, so
resume is refused until the image is checked and the target reloaded,
even if the failure was a transient ENOSPC of the underlying fs and
the space has been freed since.

Redirty the page on -ENOSPC, so the slow writeback timer retries it,
as data writes delayed on ENOSPC are retried. The suspend flush fires
the timer, which gives the page one more try. A page that still fails
then is not redirtied, as wants_suspend is set, so nothing is left
pending on a suspended device and md_writeback_error is set as before.

complete_metadata_writeback() turned every failed write into -EIO.
Pass the errno of the write through and keep -EIO for a short write.
A data request depending on a failed L1/L2 write then ends with
BLK_STS_NOSPC and is delayed and resubmitted like any other write
failing with ENOSPC, as already happens when fsync fails with it.

https://virtuozzo.atlassian.net/browse/VSTOR-148171
Feature: dm-qcow2: block device over QCOW2 files driver

Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
---
 drivers/md/dm-qcow2-map.c    | 6 ++++--
 drivers/md/dm-qcow2-target.c | 1 -
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/md/dm-qcow2-map.c b/drivers/md/dm-qcow2-map.c
index 4197f7704e18..27ae22495f37 100644
--- a/drivers/md/dm-qcow2-map.c
+++ b/drivers/md/dm-qcow2-map.c
@@ -1357,6 +1357,8 @@ static void clear_writeback_status(struct qcow2 *qcow2, struct md_page *md,
 		 * so here we care about R1R2 only.
 		 */
 		md->status |= MD_WRITEBACK_ERROR;
+		if (ret == -ENOSPC && !READ_ONCE(qcow2->tgt->wants_suspend))
+			qcow2_md_make_dirty(qcow2, md, true);
 	}
 	if (md->wbd) {
 		if (likely(ret == 0))
@@ -3864,9 +3866,9 @@ static int complete_metadata_writeback(struct qcow2 *qcow2)
 		md = qio->ext->md;
 		qvec = qio->data;
 		ret = qio->ret;
-		if (unlikely(ret != PAGE_SIZE))
+		if (unlikely(ret >= 0 && ret != PAGE_SIZE))
 			ret = -EIO;
-		else
+		else if (ret == PAGE_SIZE)
 			ret = fsync_ret;
 
 		do_md_page_write_complete(ret, qcow2, md);
diff --git a/drivers/md/dm-qcow2-target.c b/drivers/md/dm-qcow2-target.c
index 6824d95193ae..1b7a75239291 100644
--- a/drivers/md/dm-qcow2-target.c
+++ b/drivers/md/dm-qcow2-target.c
@@ -190,7 +190,6 @@ void qcow2_flush_deferred_activity(struct qcow2_target *tgt, struct qcow2 *qcow2
 	for (node = rb_first(&qcow2->md_pages);
 	     node; node = rb_next(node)) {
 		md = rb_entry(node, struct md_page, node);
-		/* FIXME: call md_make_dirty() and try once again? */
 		if (md->status & MD_WRITEBACK_ERROR) {
 			QC_ERR(tgt->ti, "Failed to write dirty pages");
 			tgt->md_writeback_error = true;
-- 
2.53.0

_______________________________________________
Devel mailing list
Devel@openvz.org
https://lists.openvz.org/mailman/listinfo/devel

  parent reply	other threads:[~2026-11-09 12:00 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-09 11:58 [Devel] [PATCH hci-8.1 v10 00/10] dm-qcow2: truncate unused tail of image on suspend Alexander Ivanov
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 01/10] dm-qcow2: add qcow2_md_page_read_sync() helper Alexander Ivanov
2026-11-09 12:03   ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 02/10] dm-qcow2: drop duplicate prefix from QC_ERR/QC_INFO messages Alexander Ivanov
2026-11-09 12:02   ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 03/10] dm-qcow2: extend the file for a new refblock in allocate_cluster() Alexander Ivanov
2026-11-09 12:03   ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 04/10] dm-qcow2: complete wbd before ending the data qio Alexander Ivanov
2026-11-09 12:06   ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 05/10] dm-qcow2: flush lower md before clearing dirty bit on merge failure Alexander Ivanov
2026-11-09 12:05   ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 06/10] dm-qcow2: keep the dirty bit of an image that needs check Alexander Ivanov
2026-11-09 12:06   ` no-reply
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 07/10] dm-qcow2: flag the image for check if reftable relocation fails late Alexander Ivanov
2026-11-09 12:09   ` no-reply
2026-11-09 12:25     ` Alexander Ivanov
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 08/10] dm-qcow2: leak clusters allocated for a failed L1/L2 writeback Alexander Ivanov
2026-11-09 12:09   ` no-reply
2026-11-09 12:41     ` Alexander Ivanov
2026-11-09 11:58 ` Alexander Ivanov [this message]
2026-11-09 12:13   ` [Devel] [PATCH hci-8.1 v10 09/10] dm-qcow2: retry R1/R2 writeback that failed with ENOSPC no-reply
2026-11-09 12:45     ` Alexander Ivanov
2026-11-09 11:58 ` [Devel] [PATCH hci-8.1 v10 10/10] dm-qcow2: truncate unused tail of image on suspend Alexander Ivanov
2026-11-09 12:14   ` no-reply
2026-11-09 13:26     ` Alexander Ivanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261109115856.1362416-10-alexander.ivanov@virtuozzo.com \
    --to=alexander.ivanov@virtuozzo.com \
    --cc=andrey.zhadchenko@virtuozzo.com \
    --cc=devel@openvz.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.