From: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
To: svt-core@virtuozzo.com
Cc: andrey.drobyshev@virtuozzo.com
Subject: [PATCH QEMU HCI-8.1 v3 14/28] migration: yank: Move register instance earlier
Date: Fri, 16 Oct 2026 18:26:12 +0300 [thread overview]
Message-ID: <20261016-vfio_v1-v3-14-47487cb5a8e5@virtuozzo.com> (raw)
In-Reply-To: <20261016-vfio_v1-v3-0-47487cb5a8e5@virtuozzo.com>
From: Fabiano Rosas <farosas@suse.de>
Move the register_instance call to migrate_prepare() so it can be
paired with the unregister_instance at migration_cleanup(). Otherwise,
the cleanup cannot be run when cpr_state_save() fails because the
instance is registered only after it.
When resuming from a paused postcopy migration, migrate_prepare()
returns early, but migration_cleanup() doesn't run, so the yank will
remain paired.
andrey.drobyshev:
This commit was cherry-picked from the upstream commit 7e714392437c,
adapted for the hci-dev base, which predates the upstream
migration_connect_set_error() -> migration_connect_error_propagate()
rename (77c82edadbe0): the error propagation calls in qmp_migrate()
and qmp_migrate_finish() keep the older spelling.
Also fixed here: upstream left the yank instance registered when
qmp_migrate_finish() fails before connecting (nothing calls
migration_cleanup() then), so the next migrate command aborted on
yank_register_instance(&error_abort); and the unregister at the out:
label ran on a resume, which never registered the instance. Upstream
fixed both in 6b587af5ec9d ("migration: Fold migration_cleanup() into
migration_connect_error_propagate()"), which needs the above rework;
this is the equivalent for our base.
Also refuse migrate while an incoming postcopy migration is still in
progress: the guest already runs then, but the incoming side still
holds the yank instance, so registering it with &error_abort would
abort QEMU.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/qemu-devel/20260123141656.6765-11-farosas@suse.de
Signed-off-by: Fabiano Rosas <farosas@suse.de>
---
migration/migration.c | 40 ++++++++++++++++++++++++----------------
1 file changed, 24 insertions(+), 16 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 2f8ef20c036..0b830956532 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -2174,6 +2174,15 @@ static bool migrate_prepare(MigrationState *s, bool resume, Error **errp)
return false;
}
+ /*
+ * The guest already runs during incoming postcopy, but the incoming
+ * migration still holds the yank instance registered below.
+ */
+ if (migration_incoming_postcopy_advised()) {
+ error_setg(errp, "Incoming postcopy migration is still in progress");
+ return false;
+ }
+
if (runstate_check(RUN_STATE_POSTMIGRATE)) {
error_setg(errp, "Can't migrate the vm that was paused due to "
"previous migration");
@@ -2235,11 +2244,12 @@ static bool migrate_prepare(MigrationState *s, bool resume, Error **errp)
return false;
}
+ yank_register_instance(MIGRATION_YANK_INSTANCE, &error_abort);
+
return true;
}
-static void qmp_migrate_finish(MigrationAddress *addr, bool resume_requested,
- Error **errp);
+static void qmp_migrate_finish(MigrationAddress *addr, Error **errp);
static void migrate_hup_add(MigrationState *s, QIOChannel *ioc, GSourceFunc cb,
void *opaque)
@@ -2264,7 +2274,7 @@ static gboolean qmp_migrate_finish_cb(QIOChannel *channel,
{
MigrationAddress *addr = opaque;
- qmp_migrate_finish(addr, false, NULL);
+ qmp_migrate_finish(addr, NULL);
cpr_state_close();
migrate_hup_delete(migrate_get_current());
@@ -2276,7 +2286,6 @@ void qmp_migrate(const char *uri, bool has_channels,
MigrationChannelList *channels, bool has_detach, bool detach,
bool has_resume, bool resume, Error **errp)
{
- bool resume_requested;
Error *local_err = NULL;
MigrationState *s = migrate_get_current();
g_autoptr(MigrationChannel) channel = NULL;
@@ -2329,8 +2338,7 @@ void qmp_migrate(const char *uri, bool has_channels,
return;
}
- resume_requested = has_resume && resume;
- if (!migrate_prepare(s, resume_requested, errp)) {
+ if (!migrate_prepare(s, has_resume && resume, errp)) {
/* Error detected, put into errp */
return;
}
@@ -2354,27 +2362,26 @@ void qmp_migrate(const char *uri, bool has_channels,
QAPI_CLONE(MigrationAddress, addr));
} else {
- qmp_migrate_finish(addr, resume_requested, errp);
+ qmp_migrate_finish(addr, errp);
}
out:
if (local_err) {
+ /* A resume didn't register it, see migrate_prepare() */
+ if (s->state != MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP) {
+ yank_unregister_instance(MIGRATION_YANK_INSTANCE);
+ }
migration_connect_set_error(s, local_err);
error_propagate(errp, local_err);
}
}
-static void qmp_migrate_finish(MigrationAddress *addr, bool resume_requested,
- Error **errp)
+static void qmp_migrate_finish(MigrationAddress *addr, Error **errp)
{
MigrationState *s = migrate_get_current();
Error *local_err = NULL;
-
- if (!resume_requested) {
- if (!yank_register_instance(MIGRATION_YANK_INSTANCE, errp)) {
- return;
- }
- }
+ /* Before the start functions below change the state */
+ bool resume = s->state == MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP;
if (addr->transport == MIGRATION_ADDRESS_TYPE_SOCKET) {
SocketAddress *saddr = &addr->u.socket;
@@ -2401,7 +2408,8 @@ static void qmp_migrate_finish(MigrationAddress *addr, bool resume_requested,
}
if (local_err) {
- if (!resume_requested) {
+ /* Nothing connected: migration_cleanup() won't unregister it */
+ if (!resume) {
yank_unregister_instance(MIGRATION_YANK_INSTANCE);
}
migration_connect_set_error(s, local_err);
--
2.47.1
next prev parent reply other threads:[~2026-10-16 15:26 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 15:25 [PATCH QEMU HCI-8.1 v3 00/28] vfio: support qemu-update with passed through GPU's and vGPU's #VSTOR-103860 Andrey Drobyshev
2026-10-16 15:25 ` [PATCH QEMU HCI-8.1 v3 01/28] VZ: migration/cpr-exec: fix Error leak in preserve_ram() Andrey Drobyshev
2026-10-16 15:28 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 02/28] migration/cpr-exec: restore RAM write access if exec fails Andrey Drobyshev
2026-10-16 15:28 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 03/28] vfio/region: create BAR dma-bufs with O_CLOEXEC Andrey Drobyshev
2026-10-16 15:30 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 04/28] migration: Plug memory leaks after migrate_set_error() Andrey Drobyshev
2026-10-16 15:29 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 05/28] hw/vfio: Fix liveness check in vfio_connect_kvm_msi_virq() Andrey Drobyshev
2026-10-16 15:30 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 06/28] vfio/pci: Reject invalid MSI-X Table and PBA BIR values Andrey Drobyshev
2026-10-16 15:30 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 07/28] vfio/pci: Fix information leak in vfio_rom_read() Andrey Drobyshev
2026-10-16 15:31 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 08/28] vfio/pci: Initialize rom_read_failed in vfio_pci_load_rom() Andrey Drobyshev
2026-10-16 15:32 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 09/28] vfio/pci: Grow buffer in vfio_pci_host_match() Andrey Drobyshev
2026-10-16 15:31 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 10/28] q35: Fix migration of SMRAM state Andrey Drobyshev
2026-10-16 15:33 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 11/28] migration: ensure APIC is loaded prior to VFIO PCI devices Andrey Drobyshev
2026-10-16 15:32 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 12/28] migration: Fix regression of passing error_fatal into vmstate_load_state() Andrey Drobyshev
2026-10-16 15:35 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 13/28] migration: vmstate_save_state_v: fix double error_setg Andrey Drobyshev
2026-10-16 15:38 ` no-reply
2026-10-16 15:26 ` Andrey Drobyshev [this message]
2026-10-16 15:41 ` [PATCH QEMU HCI-8.1 v3 14/28] migration: yank: Move register instance earlier no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 15/28] migration: Free cpr-transfer MigrationAddress along with gsource Andrey Drobyshev
2026-10-16 15:39 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 16/28] migration: Move CPR HUP watch to cpr-transfer.c Andrey Drobyshev
2026-10-16 15:40 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 17/28] migration: Fix crash on second migration when cancel early Andrey Drobyshev
2026-10-16 15:44 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 18/28] kvm: tolerate ioctls after kvm_close() Andrey Drobyshev
2026-10-16 15:44 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 19/28] kvm: fix coalesced MMIO flush racing with kvm_close() Andrey Drobyshev
2026-10-16 15:46 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 20/28] migration/cpr: add cpr_is_in_progress() Andrey Drobyshev
2026-10-16 15:46 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 21/28] vfio/migration: don't migrate device state during CPR Andrey Drobyshev
2026-10-16 15:55 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 22/28] vfio/listener: skip dirty page tracking " Andrey Drobyshev
2026-10-16 15:50 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 23/28] VZ: vfio/cpr: don't close KVM on cpr-exec Andrey Drobyshev
2026-10-16 15:52 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 24/28] VZ: migration/cpr-exec: abort cpr-exec if memory can't be preserved Andrey Drobyshev
2026-10-16 15:55 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 25/28] VZ: migration/cpr-exec: take the vhost-net devices back if exec fails Andrey Drobyshev
2026-10-16 15:58 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 26/28] VZ: migration/cpr-exec: don't exec if a vhost-net device can't be released Andrey Drobyshev
2026-10-16 15:56 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 27/28] VZ: vfio/region: preserve BAR mappings across cpr-exec #VSTOR-103860 Andrey Drobyshev
2026-10-16 16:02 ` no-reply
2026-10-16 15:26 ` [PATCH QEMU HCI-8.1 v3 28/28] VZ: migration/cpr-exec: allow cpr-exec with VFIO devices #VSTOR-103860 Andrey Drobyshev
2026-10-16 15:59 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016-vfio_v1-v3-14-47487cb5a8e5@virtuozzo.com \
--to=andrey.drobyshev@virtuozzo.com \
--cc=svt-core@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox